Phone: 07710 670444
Bostwick Consistometer
Service and Mechanical Calibration
Models Covered
Our Inspection and Service the Bostwick Consistometer covered both BC24 and BC30, BC50 Models.
We can also test service and repair Consistometers from other manufacturers.
Cleaning
Before our Inspection begins the instrument will be thoroughly cleaned.
Scale Readability Check
Check for scale readability deterioration, Re-infill engraved items only if required.
Full mechanical Check & Correction (mechanical Calibration)
Using our purpose built test equipment we can check the geometry off the device and the accuracy of the level and adjust or replace if required.
Gate Spring & Nylon Bearing Replacement
To Ensure optimal gate operation all springs and nylon bearing in the gate mechanism will be replaced and tested.
Reservoir Gate Test
As part of our inspection we will test the reservoir gate for and leaks, and correct functionality.
Wearable Parts Inspection
As well and checking and replacing the gate springs and bearing we will also check for damage and usability the thumb screws, bubble mechanism and replace if necessary.
Exceptions
If during our inspection we determine that the instrument is unrepairable we will inform you immediately and we will also include a quotation for a replacement unit, at a discounted rate.
Pricing
Cost of Annual Inspection, Service & calibration- £45.00 ex vat (Includes Free return Delivery)
Your instrument will be returned within 5 working days unless otherwise stated.
Any repair work carried out is guaranteed for 3 months.
Aquapal III Karl Fischer Titrator
Service & Calibration
Functional test .
Full functional test including testing of keyboard, printer, stirrer motor and switches.
Electrical test.
Full electrical test including checking of power supplies, calibration settings, RS232 PC and balance interface were applicable.
Glassware.
Glassware will be cleaned; septa’s, O-ring and molecular sieve will be replaced.
Calibration.
Traceable water standards will be used to check the full range of the instrument.
A full test and calibration certificate will be supplied including a list of equipment used in the calibration procedure for tractability purposes.
Note: To optimise the instrument’s performance internal proprietary software adjustments may need to be made.
As the original manufacturers of the Aquapal range of titrators we are the only company able to carry out this procedure.
Repair work.
A written quotation will be provided for any repair work (parts and/or labour) required to the instrument or glassware.
No work will be undertaken until an acceptance is received together with an official purchase order to cover such work.
Cost of service and calibration,
Cost £510.00 + £30.00 shipping. (ex VAT) Return to factory service and calibration,
One year Service contract,
Cost £690.00 + £30.00 shipping. (ex VAT) Includes one Return to factory service and calibration plus one Return to factory for repair all parts and labour included.
All glassware parts are not included in this option.
Your instrument will be returned within 5 working days unless otherwise stated.
Any repair work carried out is guaranteed for 3 months.
Normal Terms & Conditions of Sale shall apply.
© Copyright. 2024 All rights reserved.
We need your consent to load the translations
We use a third-party service to translate the website content that may collect data about your activity. Please review the details in the privacy policy and accept the service to view the translations.